Ford Ranger Raptor 23- | STEDI Inner Grille Kit
€926
NOTE: Raptor have Radiator Shutter Vanes in front of the radiator, a couple of these vanes have to be dismantled to make room for the LED Light Bars. This could affect guarantees and is done at your own risk, we take no responsibility for any consequences.
- We ship all over Europe
- Secure card payment
- BRANDStedi
- CAR MAKEFord
- CAR MODELRanger Raptor
- CATEGORYVehicle Specific Grille Kit
- MODELST3303
Description
Article no.: 151522
NEXT-GEN COVERED.
Our Inner Grille Bracket has been carefully designed to suit Ford's next-gen Ranger Raptor, catering to 2 of our performance-packed ST3303 Pro LED Light Bars.
LINGERING IN THE DARKNESS.
Hidden neatly behind the factory grille, our Inner Grille Bracket will preserve the OEM finish that you ever so desire, whilst the pair of ST3303 Pro Light Bars will be sure to make their presence known at night, throwing an abundance of light at the road ahead.
CHANGE ISN'T ALWAYS A GOOD THING.
The simple, modification-free install of our Inner Grille Bracket is designed not to obstruct any factory collision & safety sensors, meaning no sparks need to fly and the OE factory warranty remains intact.
THE NITTY GRITTY.
Designed to fit all Ford Next-Gen Ranger-Raptor models ONLY!
Does not fit Ford Ranger or Everest models, please see our Next-Gen Ford Ranger 23- | STEDI Inner Grille Kit for these models.
Manufactured with 3mm Stainless Steel, and designed to be fastened to pre-existing holes which are already present on the inner side of the front grille. This is a completely non-intrusive install meaning that no new holes need to be made, nor do sections of the front bumper need any cutting or modifying.
The end result is a very robust, stealth installation.
Stainless Steel
Designed to minimize disruption of air-flow
No need to remove front bumper
Bolts to pre-existing holes
No drilling required, bolt and nut kit included
Tech Specs
LED 12 x CREE XPL Hi-Intensity LED (each)
VOLTAGE 9V - 32V
CURRENT DRAW (AMPERES) 5.9a @ 13.6v (each)
RAW LUMENS 13,140Lm (each)
EFFECTIVE LUMENS 6,720Lm (each)
PEAK INTENSITY (CANDELA) 360,800cd (each)
COLOUR TEMP (CCT) 5700K
LENS MATERIAL Optical Grade, Hard-Coated Lexan
HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink
INGRESS PROTECTION IP68
FLOOD BEAM 50°
SPOT BEAM 9°
LIFESPAN 50,000hrs
OPERATING TEMP -40°C ~ +150°C
WEIGHT 1,295kg (each)
WHAT'S INCLUDED
2 x ST3303 PRO 12 LED 11 Inch Light Bars
Orange End Caps
Grey End Caps
Next-Gen Ranger Raptor Inner Grille Bracket Kit
Single Connector Plug & Play SMART Harness High Beam Driving Light Wiring
Deutsch DT-Y Splitter 1 to 2
High Beam Adapter
NOTE: This kit does NOT fit cars with Radiator Shutter Vanes in front of the radiator. Please check if your car has this or not before placing an order.